Visit Stang Life!
Stang Life. Stop by and check it out.
About
Welcome to 93coupe.com. This site documents my 93 Coupe build. We have assembled and installed a 2012 Boss 302 engine from Ford Racing parts along with all top notch suspension and supporting equipment. Take a second to read the "Back Story" from the top menu. While I will document modifications to my car from this point forward, some of the modifications were performed a few years back - which I will also write content for. Subscribe to the RSS feed for updates!
Maximum Motorsports Archive
-
![Say it isn’t so! I took a lot of heat when I started asking around about a trailer hitch for the coupe. I’ve seen numerous sports cars with small tire […]](http://93coupe.com/wp-content/uploads/2013/05/IMG_5845-115x115.jpg "Trailer Hitch on a 1993 Mustang Coupe – Track Guys HPDE")
Trailer Hitch on a 1993 Mustang Coupe – Track Guys HPDE
Posted on May 16, 2013 |Say it isn’t so! I took a lot of heat when I started asking around about a trailer hitch for the coupe. I’ve seen numerous sports cars with small tire […] -
![Got the coyote project ready just in time for Sebring this year. I ran in group 2 this year. The build was fresh so I wanted an instructor in the […]](http://93coupe.com/wp-content/uploads/2012/06/TRACK-GUYS-SEBERING-MAY-26-27-2012-DL-10-035-115x115.jpg "93 Foxbody Coyote Mustang at Sebring")
93 Foxbody Coyote Mustang at Sebring
Posted on June 1, 2012 |Got the coyote project ready just in time for Sebring this year. I ran in group 2 this year. The build was fresh so I wanted an instructor in the […] -
![Yesterday, I received the Boss 302 heads for my build. The runners and chambers are CNC ported and look great. I should be able to start engine assembly next […]](http://93coupe.com/wp-content/uploads/2012/03/bossheads-042-115x115.jpg "Ford Racing 2012 Boss 302 Cylinder Heads")
Ford Racing 2012 Boss 302 Cylinder Heads
Posted on March 28, 2012 |Yesterday, I received the Boss 302 heads for my build. The runners and chambers are CNC ported and look great. I should be able to start engine assembly next […] -
![As part of the maximum grip box, I installed the set of lower control arms. These arms have a urethane bushing at the chassis end and a spherical at the […]](http://93coupe.com/wp-content/uploads/2011/09/mm-control-arms-5-115x115.jpg "Maximum Motorsports Rear Control Arms")
Maximum Motorsports Rear Control Arms
Posted on September 28, 2011 |As part of the maximum grip box, I installed the set of lower control arms. These arms have a urethane bushing at the chassis end and a spherical at the […] -
![I had been working on the suspension and rebuilding these wheels in no particular order. It seemed like this part of the project would never end but all of a […]](http://93coupe.com/wp-content/uploads/2011/09/suspension-done-5-115x115.jpg "Maximum Motorsports Grip Box – Forgeline Wheels – Nitto NT05 Tires installed")
Maximum Motorsports Grip Box – Forgeline Wheels – Nitto NT05 Tires installed
Posted on September 25, 2011 |I had been working on the suspension and rebuilding these wheels in no particular order. It seemed like this part of the project would never end but all of a […] -
![I’ve decided to send the Forgeline GT3 wheels back to Forgeline to get rebuilt/repaired. I was already leaning towards getting them redone in silver as opposed to black, as they […]](http://93coupe.com/wp-content/uploads/2011/07/IMG_2112-115x115.jpg "I Prefer Silver Wheels – Forgeline GT3")
I Prefer Silver Wheels – Forgeline GT3
Posted on July 4, 2011 |I’ve decided to send the Forgeline GT3 wheels back to Forgeline to get rebuilt/repaired. I was already leaning towards getting them redone in silver as opposed to black, as they […] -
![The car has been apart for quite a while. Now that the engine bay paint is completed, I can move on to the Maximum Motorsports Max Grip Box installation. The […]](http://93coupe.com/wp-content/uploads/2011/05/GB-1-115x115.jpg "Maximum Motorsports Max Grip Box in Coyote Coupe")
Maximum Motorsports Max Grip Box in Coyote Coupe
Posted on May 25, 2011 |The car has been apart for quite a while. Now that the engine bay paint is completed, I can move on to the Maximum Motorsports Max Grip Box installation. The […] -
![Finally done with the engine bay. It has been the project that goes forever. Just when you think you’re done, there’s another step. My last step was epoxy primer but […]](http://93coupe.com/wp-content/uploads/2011/04/img_1350-115x115.jpg "Smoothing Engine Bay – Base and Clear")
Smoothing Engine Bay – Base and Clear
Posted on April 19, 2011 |Finally done with the engine bay. It has been the project that goes forever. Just when you think you’re done, there’s another step. My last step was epoxy primer but […]