Visit Stang Life!
Stang Life. Stop by and check it out.
About
Welcome to 93coupe.com. This site documents my 93 Coupe build. We have assembled and installed a 2012 Boss 302 engine from Ford Racing parts along with all top notch suspension and supporting equipment. Take a second to read the "Back Story" from the top menu. While I will document modifications to my car from this point forward, some of the modifications were performed a few years back - which I will also write content for. Subscribe to the RSS feed for updates!
1993 coupe Archive
-
![Say it isn’t so! I took a lot of heat when I started asking around about a trailer hitch for the coupe. I’ve seen numerous sports cars with small tire […]](http://93coupe.com/wp-content/uploads/2013/05/IMG_5845-115x115.jpg "Trailer Hitch on a 1993 Mustang Coupe – Track Guys HPDE")
Trailer Hitch on a 1993 Mustang Coupe – Track Guys HPDE
Posted on May 16, 2013 |Say it isn’t so! I took a lot of heat when I started asking around about a trailer hitch for the coupe. I’ve seen numerous sports cars with small tire […] -
![Ok – so I skipped ahead a bit. I have a bunch of pictures and information from the assembly of the 2012 Boss 302 engine but it’s going to take […]](http://93coupe.com/wp-content/uploads/2012/05/bossengine-038-115x115.jpg "2012 Boss 302 Engine Installed in 1993 Foxbody Coupe")
2012 Boss 302 Engine Installed in 1993 Foxbody Coupe
Posted on May 9, 2012 |Ok – so I skipped ahead a bit. I have a bunch of pictures and information from the assembly of the 2012 Boss 302 engine but it’s going to take […] -
![Yesterday, I received the Boss 302 heads for my build. The runners and chambers are CNC ported and look great. I should be able to start engine assembly next […]](http://93coupe.com/wp-content/uploads/2012/03/bossheads-042-115x115.jpg "Ford Racing 2012 Boss 302 Cylinder Heads")
Ford Racing 2012 Boss 302 Cylinder Heads
Posted on March 28, 2012 |Yesterday, I received the Boss 302 heads for my build. The runners and chambers are CNC ported and look great. I should be able to start engine assembly next […] -
![I had been working on the suspension and rebuilding these wheels in no particular order. It seemed like this part of the project would never end but all of a […]](http://93coupe.com/wp-content/uploads/2011/09/suspension-done-5-115x115.jpg "Maximum Motorsports Grip Box – Forgeline Wheels – Nitto NT05 Tires installed")
Maximum Motorsports Grip Box – Forgeline Wheels – Nitto NT05 Tires installed
Posted on September 25, 2011 |I had been working on the suspension and rebuilding these wheels in no particular order. It seemed like this part of the project would never end but all of a […] -
![I’ve decided to send the Forgeline GT3 wheels back to Forgeline to get rebuilt/repaired. I was already leaning towards getting them redone in silver as opposed to black, as they […]](http://93coupe.com/wp-content/uploads/2011/07/IMG_2112-115x115.jpg "I Prefer Silver Wheels – Forgeline GT3")
I Prefer Silver Wheels – Forgeline GT3
Posted on July 4, 2011 |I’ve decided to send the Forgeline GT3 wheels back to Forgeline to get rebuilt/repaired. I was already leaning towards getting them redone in silver as opposed to black, as they […] -
![The car has been apart for quite a while. Now that the engine bay paint is completed, I can move on to the Maximum Motorsports Max Grip Box installation. The […]](http://93coupe.com/wp-content/uploads/2011/05/GB-1-115x115.jpg "Maximum Motorsports Max Grip Box in Coyote Coupe")
Maximum Motorsports Max Grip Box in Coyote Coupe
Posted on May 25, 2011 |The car has been apart for quite a while. Now that the engine bay paint is completed, I can move on to the Maximum Motorsports Max Grip Box installation. The […] -
![I finally got these installed. I used a set of stock fox seat tracks, sliders and springs to mount the Boss 302 seats in the 93. First, remove the OEM […]](http://93coupe.com/wp-content/gallery/recaro-seats-installation/dynamic/img_1623-2-nggid03275-ngg0dyn-115x115-00f0w010c010r110f110r010t010.jpg "2012 Boss 302 Seats Installed in Fox Coupe")
2012 Boss 302 Seats Installed in Fox Coupe
Posted on May 9, 2011 |I finally got these installed. I used a set of stock fox seat tracks, sliders and springs to mount the Boss 302 seats in the 93. First, remove the OEM […] -
![Finally done with the engine bay. It has been the project that goes forever. Just when you think you’re done, there’s another step. My last step was epoxy primer but […]](http://93coupe.com/wp-content/uploads/2011/04/img_1350-115x115.jpg "Smoothing Engine Bay – Base and Clear")
Smoothing Engine Bay – Base and Clear
Posted on April 19, 2011 |Finally done with the engine bay. It has been the project that goes forever. Just when you think you’re done, there’s another step. My last step was epoxy primer but […] -
![Long story but my car is missing the drivers seat. It only has 33k miles on it – so the passenger seat is like showroom new. I haven’t had any […]](http://93coupe.com/wp-content/uploads/2011/04/img_1258-115x115.jpg "Boss 302 Recaro Seats")
Boss 302 Recaro Seats
Posted on April 8, 2011 |Long story but my car is missing the drivers seat. It only has 33k miles on it – so the passenger seat is like showroom new. I haven’t had any […] -
![Ok, when I repurchased the car, the previous owner had started the long project of smoothing the engine bay. In doing so, he also removed the A/C from the car, […]](http://93coupe.com/wp-content/themes/arras-theme-master/images/thumbnail.png "Smoothing the Engine Bay Round 2")
Smoothing the Engine Bay Round 2
Posted on April 8, 2011 |Ok, when I repurchased the car, the previous owner had started the long project of smoothing the engine bay. In doing so, he also removed the A/C from the car, […]