I also installed the “Wild Rides” torque box reinforcement brackets for the lowers.  The kit included the upper brackets too – but I no longer use upper control arms, so…  These fit really well.  I tightened the control arm/chassis bolt first and the bracket pulled up nice and flush with the seat base above it. I drilled and mounted the top plate and then covered it with a sound deadening material – I imagine some additional NVH will want to transmit through this area.

All-in-all a simple install.  Grease the bushings really well to avoid squeaks.  I’ll post the torque arm install next – which is when the actual rear end goes back into the car.

The post Maximum Motorsports Rear Control Arms appeared first on 93Coupe.com.