Comments for 93Coupe.com

Comment on Trailer Hitch on a 1993 Mustang Coupe – Track Guys HPDE by Let's see your tire trailer setup!! - Ford Mustang Forums : Corral.net Mustang Forum

Thu, 16 May 2013 14:39:21 +0000

[...] up buying the HF 48×40" trailer on sale for under $200. Trailer Hitch on a 1993 Mustang Coupe – Track Guys HPDE – 93Coupe.com __________________ 93 Coupe w/2012 Boss 302 Swap, Maximum Motorsports, Forgeline, Magnum. www [...]

Comment on 2012 Mustang Boss 302 Block Prep for engine build! by admin

admin — Mon, 01 Oct 2012 14:47:21 +0000

It was within spec. I did take it to the machine shop for measuring though. I asked them to pair the pistons with the most appropriate bore so that I wouldn’t end up putting the largest piston in the smallest hole or vice versa.

Comment on 2012 Mustang Boss 302 Block Prep for engine build! by Paul

Paul — Thu, 27 Sep 2012 02:10:58 +0000

Was the block within spec from Ford, or did you have to take it to a machine shop?

Comment on Maximum Motorsports Grip Box – Forgeline Wheels – Nitto NT05 Tires installed by admin

admin — Tue, 11 Sep 2012 17:10:42 +0000

I “think” it was 5.5 front and 6.5 rear. It’s in the article somewhere.

Comment on Maximum Motorsports Grip Box – Forgeline Wheels – Nitto NT05 Tires installed by Seth Culver

Seth Culver — Fri, 31 Aug 2012 00:34:51 +0000

What back spacing and offset did you use for both front and rear wheels? Im installing the same suspension and would like to use 18×9 and 18×10 wheels. I know they can fit, im just concerned about the back spacing and offset on the wheels im looking at!

Comment on SN95 5-lug Brake Conversion by How much would it cost to switch a fox body over to 5 lug? (the right way) - Page 2

Tue, 07 Aug 2012 04:54:06 +0000

[...] SN95 Brakes on a Fox – Wazee's Pulleys & Auto Parts Inc. SSOTN – Gear Install SN95 5-lug brake conversion for foxbody mustang – 93coupe.com 8.8" Rear End w/Disc Brake Swap Fox Mustang Brake Upgrade – Muscle Mustangs & Fast Fords [...]

Comment on 2012 Boss 302 Seats Installed in Fox Coupe by Recaro seats??? - Vintage Mustang Forums

Recaro seats??? - Vintage Mustang Forums — Fri, 27 Jul 2012 00:19:00 +0000

[...] Originally Posted by SitDown Yea if you look at the slider there are 3 holes per end, so you can raise, lower, or create pitch. That's nice. I would have never thought of doing something like that. When you say to high do you mean the headrest is almost touching the roof or the distance between the steering wheel and the seat is to small? I found this site where a guy fit the recaros in a fox body and there's a good picture of the height difference between the fox seats and the recaros. 2012 Boss 302 Seats Installed in Fox Coupe – 93Coupe.com [...]

Comment on Maximum Motorsports Max Grip Box Part 1 by Patrick

Patrick — Fri, 13 Jul 2012 23:49:08 +0000

Your car looks great and the website has answered a lot of questions for me, however you did not address one thing that has me curious. Did you use the 94 spindles in these pictures with your MM K member? I ask because MM recommends switching to the 96+ spindles when their K is used as opposed to the factory K. According to the information in their “Tech Tips” the outer tie rod ends do not mate up in an optimal position when 94 spindles are used with the MM K. I’m curious to know if you experienced problems with bump steer, odd fitment of a bumpsteer kit to the spindle arms or interference with the wheel hoops because of the lenght bolt needed for the bumpsteer linkage to work correctly. Any pictures you could post would be most helpful. Thanks in advance for any info you can provide.

Patrick

Comment on Maximum Motorsports Rear Control Arms by joakin

joakin — Sat, 30 Jun 2012 17:02:07 +0000

I love the fox stangs… and yours is unique powered with that 5.0 coyote engine, i want to see pics of the interiors (deck) etc, sorry for my bad english…

Comment on 2012 Boss 302 Engine Installed in 1993 Foxbody Coupe by Me

Me — Mon, 18 Jun 2012 22:35:57 +0000

Love it… is there any place I could contact you at for the list? sorry but I might have to copy this… straight up awesome